Digitalpersona the fingerprint reader is not connected

#DIGITALPERSONA THE FINGERPRINT READER IS NOT CONNECTED HOW TO#

#DIGITALPERSONA THE FINGERPRINT READER IS NOT CONNECTED HOW TO#

Now that you have this information, you need to log into your router and configure port forwarding (Lookup how to configure port forwarding for your router on Google). (2) If you are not using default port 4370 for forwarding, then make sure that this Fingerprint Reader management software allows you to specify your own port number.

This software MUST have 2 things: (1) if you do not have static IP, then make sure the Fingerprint Reader manager software that you are using allows you to enter a host name instead of IP address.

Finally, you need to have some kind of Fingerprint Reader manager application which will allow you remotely administer your device.

You router must support Port Forwarding and you need to have access to your router.

If you do not know how to do this, you can find lots of information on Google. Lots of routers support Dynamic DNS option.

You need to have static IP or you can configure Dynamic DNS.

So you can safely assume this is the correct port. Very rarely that this port would be modified.

Fingerprint Reader by ZK Technology uses UDP port 4370.

Make sure you can ping it from any computer on the same LAN as the Fingerprint Reader.

You need to know the IP of the Fingerprint Reader.

Here what you need to know before you can proceed: In order for you to connect to you Fingerprint Reader remotely, you do not need to do anything in the Fingerprint Reader itself instead, you need to configure your network settings where your reader is. How to connect to Fingerprint Reader from a remote location

Time and Attendance Solutions for Large Enterprises.

Digitalpersona the fingerprint reader is not connected